Hot-melt adhesive film, also known as hot-melt hot glue, hot-melt double-sided adhesive, hot-melt back adhesive, is a kind of adhesive material similar to double-sided adhesive, which has the adhesive material that always sticks the two materials together. The hot-melt adhesive particles are melted and coated into a film-like hot-melt adhesive by the coating head.

Common hot melt adhesive film usage method

1. The hot-melt adhesive film is usually protected by release paper. Tear off the release paper and place the hot-melt adhesive film between the material A and material B that need to be bonded, and heat it with a heating device. After cooling, the material A and material B will stick together.

2. Adhere one side of the hot melt adhesive film to material A, use heating equipment to separate the release paper after heating, and then tear off the release paper, glue the materials B that need to be bonded together, heat with heating equipment, and cool down After that, material A and material B will be bonded together.

Advantages of hot melt adhesive film

1, 100% environmentally friendly.

2. Fast bonding speed and high efficiency.

3. It can be repeatedly bonded, and after heating, it can be bonded again.

4. Can be used as adhesive and sealant at the same time

5. Instead of glue, dispense with glue and brush glue.

6. High adhesion to most materials, higher than glue.

7, can be automated production.

8. Dry cleaning, washing, high temperature and low temperature are optional.

Application areas: leather bonding, shoe materials, clothing, luggage, handbags, tablet phone covers, electronic protective covers, electronic products, automotive interiors, handicraft bonding, wallpaper bonding, seamless underwear, clothing accessories, various adhesives He and so on.

Common bonding materials:

Leather (cowhide, sheepskin, pigskin, first layer/second layer, etc.), pvc leather, PU leather, etc.,

Fabrics (cotton, polyester, Lycra, Jiaji cloth, blended, etc.),

Metals (aluminum, copper, iron, galvanized sheet, nickel, stainless steel, etc.),

Plastics (ABS, PVC, PP, PE, glass fiber board, resin board, etc.).

Hot melt adhesive film series (film + release paper)

Width: 1400mm 0-1500 (can be customized).

Thickness: 0.03mm / 0.05mm / 0.06mm / 0.08mm / 0.1mm / 0.15mm (excluding release paper thickness).

Length: 200Y/300Y/400Y other lengths can be customized.

Product form: film + release paper, the surface is matte, and it is transparent after thermal bonding.

Melting point: 70-80 degrees / 90-100 degrees / 110-120 degrees / 130-140 degrees

Working temperature: 90-100 degrees / 110-120 degrees / 130-140 degrees / 150-160 degrees

Pressing time: 5-30 seconds.